American elbow plug
Voltage level: 15kV, 25kV, used for main or branch systems in American style box transformers, ring main cabinets, and cable branch boxes, can be plugged into the 200A side. Suitable for cable cross-section of 35mm2-150mm2. The conductive rod connector has an arc extinguishing function and can be used as a load switch to operate a 200A current. The capacitive test point of the American elbow plug can be equipped with a live indicator.
American elbow type lightning arrester
Voltage level: 15kV, 25kV, square wave current 600A, using imported rubber, superior electrical performance, American style elbow type lightning arrester installed on box type transformers, ring main cabinets, cable branch boxes and other equipment. Provide reliable overvoltage protection for equipment. Under any grounding method at the neutral point, the lightning arrester can operate reliably even if it deteriorates during long-term operation or is damaged by lightning strikes. This effectively prevents the shattering explosion of the lightning arrester and permanent grounding faults in the power system caused by lightning arrester damage. The residual voltage is low, the current capacity is large, the response time is fast, and the steep wave is flat, ensuring the safe operation of the power grid.
American style sleeve seat
Voltage level: 15kV, 25kV, single pass bushing is used for high-voltage introduction in box transformers, and can also be used for high-voltage connection in ring main cabinets. When using the product, it is screwed onto the sleeve seat to provide a socket for American elbow plugs, and is matched with a sleeve seat and an insulating cap.
Other attachments
Single pass casing H-type busbar, sleeve seat, docking sleeve, insulation cap
