European style front joint
Voltage level: 15kV, 25kV, 35kV, this terminal is a European style cable joint. Also known as a touchable connector. Front connectors are used for cable branch boxes, ring main cabinets, box transformers, etc. For fully shielded products. The connection of cable joints can achieve shielding, full insulation, full sealing, and touch when charged, ensuring the safe and reliable operation of the cable network. Suitable for the inlet and outlet terminals of cross-linked power cables, threaded connection with the double conduit of the switchgear. The front connector is suitable for cable cross-sections of 25mm to 400mm2.
European style rear joint
Voltage levels: 15kV, 25kV, 35kV, with the rear joint installed behind the front joint, used for cable branch boxes, ring main cabinets, box transformers, etc. For fully shielded products. The connection of cable joints can achieve shielding, full insulation, full sealing, and touch when charged, ensuring the safe and reliable operation of the cable network. The rear joint is suitable for cable cross-sections of 25mm to 400mm2.
European elbow connector
The European elbow plug is used for ring main cabinets, with a rated current of 250A and a cable cross-section of 25mm to 150mm2. It is widely used in fully sealed ordinary transformers or box transformers for high-voltage incoming lines.
European style rear connected lightning arrester
Voltage level: 15kV, 25kV, square wave current of 600A, commonly used in box type transformers, ring main cabinets, cable branch boxes, and other equipment with lightning arresters. Provide reliable overvoltage protection for equipment. The rear joint lightning arrester is installed after the front or rear joint. Under any grounding method at the neutral point, the lightning arrester can operate reliably even if it deteriorates during long-term operation or is damaged by lightning strikes. This effectively prevents the shattering explosion of the lightning arrester and permanent grounding faults in the power system caused by lightning arrester damage. The residual voltage is low, the current capacity is large, the response time is fast, and the steep wave is flat, ensuring the safe operation of the power grid.
European style touchable front and rear connectors
Voltage level: 15kV, 25kV. The touchable front connector is applied to the main network system of the ring main cabinet, cable branch box, or the ring main system of the box transformer, as an inlet and outlet cable connection. It can also be connected to a 630A busbar, or multiple sets of connections can be made through the touchable rear connector to form multiple circuits, suitable for cable cross-sections of 25mm to 400mm2.
Other attachments
Single pass casing H-type busbar, sleeve seat, docking sleeve, insulation cap.
